Here is a quick tutorial on how to install JB on your Galaxy S Advance
Instructions:
- Extract Firmware zip file that you downloaded already from above link, you will get a .tar file and some other files.
- Open Odin
- Power off your phone
- Now, put the Galaxy S Advance I9070 phone in Download Mode by pressing pressing and holding down the Volume Down and Home buttons while pressing the Power button until you are welcomed by a green robot indicating you are in Download Mode
- Now run Odin
- Now connect your Galaxy S Advance GT-I9070 with your PC using USB cable. A message will arrive under Odin’s message box in the bottom left saying “Added!!”. If you don’t get the same then you should try another USB port (try USB port located in back in your desktop PC). If that too don’t work then you should then reinstall the driver. If you successfully see the “Added!!” message in Odin then you are ready to go in next step. You should also see COM port with a number in Yellow if you successfully added your device
- Click the PDA Button, and select the .tar file here with *code* appearing in its name
- Make sure Auto Reboot and F. Reset Time checkboxes are selected
- Hit the START button to begin the flashing process.
- Once flashing completed, the phone will reboot automatically and soon you will see a PASS message with green background in the left-most box at the very top of the Odin. You can then unplug the USB cable to disconnect your device from computer.
No comments:
Post a Comment